The following are batch states supported by the DeltaV system:
Aborted - Emergency shutdown has completed.
Aborting - Emergency shutdown is in progress.
Complete - Normal operation sequence has completed.
Held - Temporary stop operation sequence has completed, and is ready for restart.
Holding - Temporary stop operation sequence is in progress.
Ready - No operation sequence is in progress, and is ready for start command.
Restarting - Sequence for recovery from HOLD or LOST is in progress.
Running - Normal operating sequence is in progress.
Stopped - Permanent (but not emergency) shutdown has completed.
Stopping - Permanent (but not emergency) shutdown is in progress.
Loading - Loading the batch to the Batch Executive. Occurs when creating the batch.
Load_Failed - Batch creation failed. To view the reason, right click the batch.
Lost - The batch has been forced to shut down from the Batch Application Manager or has otherwise lost communication with the Batch Executive.
Unloading - Unloading the batch from the Batch Executive. Occurs when the batch is removed from the batch list.
Recovering - The batch is attempting to recover to its previous state (either from Lost or after a Batch Executive warm restart).
Recover_Failed - Recovery of batch failed. To view the reason, right click the batch.
ASC_Pending - Pending the start of an Active Step Change.
ASC_Working - The execution of an Active Step Change is in progress.
ASC_Failed - The execution of an Active Step Change failed.